iOptron CEM70 ECW Mount iPolar

 5.390,00

The iOptron CEM70 ECW comes with a RA encoder, built-in WLAN and GPS, built-in iPolar, hand control, a 9.5 kg weight, internal wiring and a transport case: a wireless-controlled precision installation with a load capacity of 31.8 kg (70 lbs).

Available to order, 3 to 5 weeks delivery time
Add to Cart
iOptron CEM70 ECW Mount iPolar
iOptron CEM70 ECW Mount iPolar
 5.390,00

iOptron CEM60/70 Statief LiteRoc

iOptron LiteRoc Tripod for CEM60 and CEM70: robust tripod with reinforced 45 and 38 mm telescopic legs and large clamp levers.

iOptron iEQ45/CEM60/CEM70 2,5kg Tegengewicht

iOptron 5.5 lb Counterweight with 30 mm bore and locking screw, for balancing heavier optics on iEQ45, CEM60, and CEM70 mounts.

Not sure if this works with your telescope? We are stargazers ourselves and happy to help.

Send us a WhatsApp message

We reply on weekdays between 9:00 and 17:00.

Pay with:

iDEAL
Visa
Credit Card
Bancontact
Klarna
  • Customer reviews us with a 9,4
  • 30 day return period
  • Pay in terms
  • Advice from stargazers, via WhatsApp, in the showroom or by phone
  • Each box with own track & trace
  • Showroom in Sneek, Come and see us by appointment

iOptron CEM70 ECW Mounting iPolar: encoder precision with wireless control

The iOptron CEM70 is a center-balanced equatorial GoTo mount with a load capacity of 31.8 kg (70 lbs), excluding the counterweight, and a head weight of 13.6 kg (30 lbs). The weight is centered directly above the center of the tripod or column, which gives this mid-range mount its characteristic stability and tracking accuracy.

The ECW combines the real-time RA encoder with built-in WLAN: encoder accuracy without autoguiding, operated wirelessly from your laptop, tablet or phone.

With the built-in iPolar, GPS and internal cable management, this is a complete precision head for the demanding photographer.

iOptron CEM70 ECW Mount iPolar

Wireless and without guiding

The encoder corrects the periodic error in real time to less than 0.25 arcsecond RMS; the WLAN connects the mount to SkySafari, iOptron Commander or ASCOM without a cable.

For long focal point-to-point distances, ST-4 auto guidance remains available.

iOptron CEM70 ECW Mount iPolar

GoTo with GPS and heated hand controls

The Go2Nova 8407+ hand controller contains over 200,000 objects and has a display heater for cold nights. The built-in 32-channel GPS automatically sets the time and position.

The adjustable counterweight shaft works down to the equator and the magnetically loaded gear system engages with large levers, even with gloves on. Autoguiding is possible via the ST-4 port.

iOptron CEM70 ECW Mount iPolar

Cable management for complete photo setups

The internal cable management offers, among other things, two 12V outputs and three USB 2.0 ports on the head. You can connect your camera, filter wheel, and focuser on top, without dangling cables that can snag during rotation.

The wide dual saddle accommodates both Vixen and Losmandy rails. The mount is supplied without a tripod; the LiteRoc tripod for the CEM60/70 or a Tri-Pier is the appropriate base.

Included

  • CEM70 ECW mounting head with RA encoder, WLAN and built-in iPolar
  • Manual control with display heating
  • 9.5 kg counterweight with adjustable counterweight bar
  • Transport case, power adapter, and cables

Featured accessories

Combine the head with the LiteRoc tripod for the CEM60/70 and an extra 2.5 kg counterweight for heavier tubes.

For whom yes and for whom no

  • ✓ Astrophotographers with tubes up to approximately 20 kg for photographic use
  • ✓ Anyone building a fixed or semi-fixed setup with a lot of peripherals
  • ✓ Who wants to operate wirelessly without additional modules
  • Light travel setups: a CEM40 or GEM45 would be more practical

Specifications

TypeCenter-balanced equatorial GoTo mount
Carrying capacity31.8 kg (70 lbs), excluding counterweight
Head of weight13.6 kg (30 lbs)
ManualGo2Nova 8407+ with display heating, over 200,000 objects
Pole finderiPolar electronic, built-in
GPSBuilt-in, 32 channel
SaddleDouble, Vixen, and Losmandy
ConnectionsST-4, USB, cable management with 2x 12V and 3x USB 2.0
Counterweight9.5 kg
TripodNot included
Nutrition12 V DC
Error correctionReal-time via RA encoder, less than 0.25 arcsecond RMS
WiFiBuilt-in (WLAN)
SuitcaseIncluded

You can find more mounts and accessories for this brand at the iOptron brand page.

Additional information

Weight19 kg
Dimensions60 × 45 × 40 cm
Mounting Type

Equatorial

Telescope Electronics

GoTo

Observation goals

Astrophotography

Weight

Heavy (10 - 20 kg)

Carrying capacity

25 kg and more

Reviews

There are no reviews yet.

Be the first to review “iOptron CEM70 ECW Montering iPolar”

Your email address will not be published. Required fields are marked *